Epoxy Coatings
Benjamin Moore
P36 Super Spec HP Polyamide Epoxy
This two component epoxy offers excellent impact and abrasion resistance, plus has good acid and alkali resistance. For use on properly prepared interior & exterior ferrous metal, galvanized metal, wood, plaster, masonry and drywall surfaces. Examples include commercial and institutional walls, ceilings, machinery, piping, cabinets, storage tanks and high traffic floors.
P40 Super Spec HP 100% Solids Floor Epoxy
This 100% solids epoxy floor coating was specially designed for use as a protective coating, and for resurfacing and/or patching high abuse floors. Advanced technology will provide a tough coating with an attractive finish that is easy to maintain. Super Spec HP® Anti-Slip Aggregate (P67) can be broadcast into the wet film to create a skid-resistant surface.
P42 Super spec HP Waterborne Epoxy HG Enamel
This two-component waterborne epoxy is ideal for use on properly prepared interior & exterior ferrous metal, galvanized metal, wood, plaster, masonry and drywall surfaces. Examples include commercial and institutional walls, ceilings, machinery, piping, and cabinets. It is an excellent floor coating for residential, commercial and institutional use and will withstand strong solvents and cleaning compounds.
P43 Super Spec HP Acrylic Epoxy Coating
This two component epoxy offers unique features such as low odor and application over slightly damp surfaces. For use on properly prepared interior & exterior ferrous metal, galvanized metal, wood, plaster, masonry and drywall surfaces that are subject to moderate abrasion or mild chemical exposures. Examples include commercial and institutional walls, ceilings, machinery, piping, cabinets, storage tanks and light traffic floors. Available in two gloss levels: Use Catalyst P43-84 for a Gloss finish, or Catalyst P43-86 for a Semi-Gloss finish.
P74 Super Spec HP Aliphatic Acrylic Urethane Gloss
This premium two-component, acrylic-modified aliphatic urethane offers outstanding chemical and abrasion resistance combined with excellent color and gloss retention. The cured film of this coating equals the results of the best baked-on finishes,and provides outstanding impact and chip resistance. Performs well on high abuse floors where a non-yellowing gloss finish is desired.
InslX
-
Epoxy Floor Coating
This product is a two component, 100% Solids Epoxy Coating for heavy film build applications. It is designed for one coat application on interior concrete floors subjected to industrial chemicals and high abrasion. 100% Solids Epoxy will fill many hairline cracks and superficial concrete defects, producing a smooth and aesthetically pleasing high gloss finish. This product is for industrial/commercial use only and should be applied by professional contractors, knowledgeable in these types of coating systems.
Rustoleum
-
Epoxy Mastic Coating
Epoxy Mastic Coating, Low VOC, Color Caution Yellow, Can Capacity 5 Gal, VOC Less Than 217 Grams per Liter, Tack-Free 6-8 Hours, Dry Time 6-12 Hours, Dry Time Recoat 16-72 Hours, Practical Square Feet 625-1125, For Use With Activator Rust-Oleum A910008300, Application Method Brush, Roller or Spray Gun, Surfaces For Aluminum, Concrete, Galvanized Steel, Clean Metal or Masonry, Exposure Conditions Moderate to Severe, USDA Acceptable, Uses Structural Steel, Conveyers, Industrial Equipment, Storage Tanks
